|
![]() |
BELOW IS A LIST OF MOTOR NUMBERS AND CROSS REFERENCE
NUMBERS, ONCE YOU FIND YOUR NUMBER, CLICK ON THE LINK.
IF THE LINK IS NOT ACTIVE, PLEASE EMAIL US OR CALL FOR MORE INFORMATION AND TO
SEE IF IT CAN STILL BE LOCATED.
|
|
|
HOW TO FIND YOUR BROAN MODEL NUMBER |
|
Standard Under Cabinet
|
Label Placement The model label is located either on the right or left side wall of the range hood canopy.
|
Allure Under Cabinet
|
Label Placement Remove range hood filters by pulling down on the filter tabs. The series number is located either on the back wall of the range hood housing or on the Teflon air pan. (Example...QS1, QS2 or QS3)
|
BROAN ELITE FASHION STYLE
|
Label Placement Remove range hood filters. The model label is located on the underside of the canopy behind the filters.
|
BROAN ELITE PROFESSIONAL STYLE
|
Label Placement The model label is located on the inside of left wall of the range hood canopy. Filters may need to be removed to access the label.
|
Island Downdraft
|
Label Placement
The model label is located on the front of unit beneath
the cook top.
|
Standard Bath Fan
|
Label Placement Remove the grille by pulling down 2 inches. Reach behind the grille and squeeze the mounting springs to remove the grille. The model label is located in the corner closest to the outlet. Some fans may have the model stamped into the motor plate instead of a printed sticker label.
|
Mid-Level Bath Fans
|
Label Placement Remove the grille by pulling down 2 inches. Reach behind the grille and squeeze the mounting springs to remove the grille. The model label is located on the underside of the motor plate.
|
Designer Style Bath Fans
|
Label Placement Remove the glass lens which is attached by two leaf springs. Use a small flat head screwdriver to pry the glass lens from the grille. Screwdriver can be inserted into one of the small slots on the perimeter of the glass lens. To avoid scratching the surface of the grille the screwdriver can be wrapped in a thin cloth or tissue. Reach over lens and push in on springs to release. Grille is held by two screws along rim or a single nut in the center. The model label is located on the underside of the motor plate.
|
Combination (Fan/Light) Bath Fans
|
Label Placement Remove light lens by pressing in on the sides and pulling down. Remove the light bulb. Remove the light reflector and grille by removing the center acorn nut. The model label is located on either the inside perimeter of housing or underside of motor plate.
|
Powered Attic Ventilators (PAVs)
|
Label Placement The model label is located on the cover of the wiring box which is visible from the attic.
|
Utility Ventilator
|
Label Placement Removed the grille by a central knob or two screws. The model may be ceiling or wall mounted. The label is located on the inside perimeter of housing opposite wiring panel.
|
Trash Compactors
|
Label Placement The model may be free standing or installed under cabinet. The label is located inside on the right wall of housing at the motor level, access through rear service panel if drawer can not be removed.
|
Heaters
|
Label Placement Remove the grille by unhooking the springs from the housing. The model number can be found inside the housing on a specification label.
|