PHONE: 843-492-7060                         FAX: 888-889-5316
eMail:
sales@coastaltechsupply.com

Click Here To Checkout!
Make payments with Authorize.net - it's fast and secure!
We are an Authorized Broan and Nutone Parts Distributor offering thousands of parts at discounted prices.  Please take advantage of the resources our website has to offer.   

             
Home Page

 

HOW TO FIND YOUR NUTONE MODEL NUMBER

CLICK HERE IF YOU HAVE A BROAN

Standard Under Cabinet


 

Label Placement

The model label is located either on the right or left side wall of the range hood canopy.

Allure Under Cabinet

Label Placement

Remove range hood filters by pulling down on the filter tabs. The series number is located either on the back wall of the range hood housing or on the Teflon air pan. (Example... WS1, WS2 or WS3)

Standard Bath Fan

Label Placement

Remove the grille by pulling down 2 inches. Reach behind the grille and squeeze the mounting springs to remove the grille. The model label is located in the corner closest to the outlet. Some fans may have the model stamped into the motor plate instead of a printed sticker label.

Whole House Ventilator
Label Placement

The data label is located on top corner of the unit housing.

QuietTest

Label Placement

Remove the grille by pulling down 2 inches. Reach between the grille and ceiling and squeeze the mounting springs together. Pull springs out of slots in mounting plate. The model label is located on the power unit mounting plate.

Powered Attic Ventilators (PAVs)
 

Label Placement

The model label is located on the cover of the wiring box which is visible from the attic.

Utility Ventilators
 

Label Placement

Removed the grille by a central knob or two screws. The model may be ceiling or wall mounted. The label is located on the inside perimeter of housing opposite wiring panel.

Central Vacuum - Power Head

Label Placement

The model number is located on the bottom of the power head.

Central Vacuum - Power Units

Label Placement

The model number is located on the side of the power unit.

Bulb Heater

Label Placement

Remove the bulb(s) from the unit. Remove the springs from the hooks inside the rough-in box. The model number is located on the inside end of the rough-in box.

ValueTest Heater

Label Placement

Release the locking tabs on the lens. Remove the lens. Remove the reflector mounting screw. Remove the reflector and grille. The model number is located on the inside edge of the housing.